AtomS3 Lite ESP32S3 Dev Kit introduced at $7.50
M5Stack just launched a miniature embedded device based on the ESP32-S4FN3 Microcontroller. The AtomS3 Lite ESP32S3 Dev Kit can be used in smart IoT applications and it’s equipped with up to 6x GPIOs, RGB indicators and one Grove connector for external peripherals. M5Stack indicates that the AtomS3 Lite features the following ESP32 module: ESP32-S3N8 – […] ⌘ Read more

Pixhawk V6X flight controller integrate 3 redundant IMUs and 2 redundant barometer sensors
The Pixhawk V6X is a flight controller platform designed in collaboration with CUAV and the PX4 team. This device follows the Pixhawk FMUv6X standard, Bus standard and Connector standard. The new flight controller supports open-source platforms such as ArduPilot, PX4 Autopilot, ROS, etc. The CUAV Pixhawk V6X implements the STM32H753II6 processor with DSP & FPU […] ⌘ Read more

Mini PC features 4x 2.5GbE ports and supports AES-NI
The VP2420 Vault Pro from Protectli is a fanless Mini-PC based on the Celeron J6412 Intel processor. The device includes an 8GB eMMC module, 1x M.2 2280 slot, dual displays, Wi-Fi and LTE support. The VP2420 Vault Pro comes in an aluminum chassis and it integrates the same processor as other recently covered Mini PCs […] ⌘ Read more

DIGI SOMs integrate pre-certified dual-band Wi-Fi 5/BL5 and Gigabit Ethernet connectivity
The Digi ConnectCore MP1 is an industrial embedded System-on-Module  platform which integrates the STM32MP157C microprocessor and a 3D GPU (Vivante – OpenGL ES) 2.0. This SoM offers up to 176x GPIOs ports and security features such as TrustZone, tamper pins, cryptographic processors, etc.  The datasheet specifies the Vivante 3D GPU has a performance up to […] ⌘ Read more

i.MX 9 based SoM from Variscite starts at $39
Variscite launched this month the VAR-SOM-MX93 which implements i.MX 93 System-on-Chip from NXP. The SoM can be configured with up to 2GB LPDDR4/4X, up to 64GB eMMC 5.1. Variscite has also launched a compatible evaluation kit providing access to 2x GbE LAN ports, multiple display ports and other flexible peripherals.  As mentioned earlier, the VAR-SOM-MX93 […] ⌘ Read more

Clearcube new NUC Mini PCs feature Alder Lake-P processors
ClearCube has launched two Mini PC models based on the 12th Gen i5/i7 Intel Cores. The DTi NUC Mini PC series support up to 64GB DDR4-3200 RAM, 2x HDMI 2.1 ports, 2x optional Thunderbolt ports and access to a copper network connection or fiber network connection. These new Mini-PCs from Clearcube are based on the […] ⌘ Read more

FPGA-based computer can be used as a personal server
Machdyne revealed today another compact embedded board based on the Lattice ECP5 FPGA which can run on Kakao Linux (partial fork of linux-on-litex-vexriscv). The Kopflos is a headless general-purpose computer equipped with an RJ45 LAN port, a JTAG header and a few USB ports for additional peripherals. The Kopflos Computer implements the Lattice ECP5 FPGA […] ⌘ Read more

Elkhart Lake Mini-PC integrates triple 2.5GbE ports and WiFi6E/BT5.2 connectivity
The TANGO-3010 is a fanless Mini PC based on the Intel Celeron J6412 low-power Quad-core processor. The new product launched by IEI Integration Corp offers 2x displays with 4K support, 2x COM ports, 1x M.2 2280 and upgradable RAM memory. The TANGO-3010 Mini-PC features the following Celeron processor with 10nm process launched in 2021: Celeron-J6412 […] ⌘ Read more

Mini-PC supports dual 2.5GbE LAN ports and Wi-Fi6/BT 5.2
GMKtec recently launched a Mini-PC based on the 8C/16T 10th Gen Intel Core i7-10875H processor (up to 5.1GHz). The NucBox 12 includes 32GB DRR4, 512GB SSD, SATA support and up to 6x USB 3.2 ports. The new GMKtec NucBox 12 features the following Comet Lake processor with 14nm process: i7-10875H — 8C/16T (2P+8E), (2.3 – […] ⌘ Read more